How stainless steel solar water heater works
1.Stainless steel solar water heater of all glass evacuated tube collector integrated with storage tank, are ideal for use in houses and other applications where cheap, reliable hot water supply is required. They are simple, economic and practical.
2. As the specific gravities of hot water and cold water are different, cold water goes downward and hot water goes upward.
3. When cold water in evacuated tubes is heated, it becaomes lighter and goes to the water tank, while cold water in the tank goes down to the evacuated tubes
4. Through this circulation, the cold water in the water tank will be gradually heated.
New coil solar water heatr features
1.Use a new coil as the heat exchanger, according to international fashion trend, it is simple to install and use
2.It takes the advantage of the tap water pressure, it is easy to operate and install
3.The water can be heated rapidly, so it can produce the high quality hot water
4.The water come from the new coil, so it is clean and drinkable.
Stainless steel solar water heater features
1. Cheap and reliable solution, Simple structure, Easy installation
2. High efficiency
3. Withstands water pressure no more than 0.1MPa
4. Operated without any power supplying
5. Electric heater can be used as back up in rainy days
6. Hot water can be used directly, or can be used as a pre-heated
Stainless steel solar water heater optional accessories
1. Controller
2. Electrical heater: 1.5/2/2.5kw
3.Magnesium anode
specification
| Descripition | stainless steel new coil solar water heater |
| Material of out tank | Food grade 0.31-0.4mm SUS304/SUS202 stainless steel |
| Material of inner tank | 0.31-0.4mm thickness SUS304 stainless steel |
| Tank insulating layer | 55mm 45kg/m³ high-density polyurethane foamed |
| Inlet and outlet hole | Male G 1/2, 3/4 |
| Max pressure | 0.05 Mpa |
| Solar collector tube | 3.3 Borosilicate glass with N/Al coating |
| Thickness of glass tube | 1.6mm |
| Vacuum tube tightness | P≤0.005 Pa |
| Absorption | as=0.93-0.96(AM1.5) |
| Emission ratio | εh=0.04-0.06(80C±5C) |
| Idle sunning property parameters | Y=220~260m2.C/KW |
| Average heat loss coefficient | ULT=0.6~0.7W/(m2.C) |
| Bracket | 1.2mm thickness SUS201/SUS202/SUS304 stainless steel |
| Structure of tank | 5 holes for air vent,overflow,water inlet and outlet,electric heater |
| Welding | Argon arc welding |
| Fastening pieces | Made of stainless steel screw |
| Absorber area | 1.875m² |
| Tube quantity | 20 tube 58x1,800mm |
| Tank capacity | 200L |
| Afford for house | 4-5persons |
Contact（www.irasolar.com）
Flora Zhang
Email: sales1@irasolar.com
Phone: 0086 159 5731 5679
Whatsapp: 0086 159 5731 5679
Bin Zheng
Email: james@irasolar.com
Phone: 0086 152 0579 2115
Whatsapp: 0086 131 3619 6086
简体中文
