Model | IRA-HP58/1.8-20 |
Material of out tank | 0.31mm thickness color steel/ fluorine carbon steel |
Material of inner tank | Food grade 1.0 mm thickness SUS304 stainless steel |
Tank insulating layer | 50mm thickness, 45kg/m³ high-density polyurethane foamed |
Inlet and outlet hole | Female G 3/4 |
Max pressure | 0.9Mpa |
Solar collector tube | 3.3 Borosilicate glass with Al-SS/Cu coating 58x1,800mm with heat pipe |
Thickness of glass tube | 1.6mm |
Vacuum tube tightness | P≤0.005 Pa |
Absorption | as=0.93-0.96(AM1.5) |
Emission ratio | εh=0.04-0.06(80C±5C) |
Idle sunning property parameters | Y=220~260m2.C/KW |
Average heat loss coefficient | ULT=0.6~0.7W/(m2.C) |
Bracket | 1.2mm thickness of galvanized steel material,38degree |
Structure of tank: | 6 holes for PT valve,water inlet and outlet,electric heater,Mag Rod , Temp.Sensor. |
Welding: | Argon arc welding |
Fastening pieces: | Made of stainless steel screw |
Absorber area | 1.874m² |
Heat pipe size | Dia14mm x 70mm length condenser,170cm length in total |
Heat pipe material | TU1 copper |
Heat pipe power | >120W/pcs |
Temperature tolerance | from -35C to 250C |
Tube quantity | 20 tubes |
Other Tube quantity | 8/10/12/15/18/20/24/30/36 tubes |
Tank capacity | 200L |
Other Tank capacity | 80/100/120/150/180/200/240/300/360L |
热管加压太阳能热水器的特点:
1.采用最佳传导性能金属热管(铜)
2.可以在寒冷的气候下全年使用
3.效率高,升温快。真空管中的热管可以快速将热能传递给加压太阳能热水器水箱中的冷水
4.系统整体压力可达1.5kg / M2,进水口可直接连接自来水,最大压力可达0.6Mpa
5.管内没有水,一根管破裂不影响系统工作
6,内胆设计合理,科学,可承受10万次疲劳试验,无任何损坏
7.平顶和倾斜屋顶的双用支架
8.系统加压,保持水箱内水温恒定,避免水位控制器故障导致水流出的问题
加压太阳能热水器工作原理:
1.加压太阳能热水器水箱没有排气孔,因此必须承受来自自来水的压力。由于水压,热水流出。
2.真空管吸收太阳能,导电铜管将热量传递到加压太阳能热水器水箱。在这种情况下,水箱内的水变热
3.热管中没有水会使整个系统承受压力
Product Show


